From HEXONET Wiki
Revision as of 19:42, 13 September 2017 by WikiAdmin
|Domains Protected Marks List|
|Name||Domains Protected Marks List|
DPML Applications can be submitted directly through HEXONET. Prior to submitting a DPML Application, the trademark holder must first register a mark with the Trademark Clearinghouse (TMCH), a service that HEXONET also provides. The mark must be registered according to the "use" standard, which is the same standard for registration during the Sunrise period. Once the TMCH has validated a mark, a SMD File (signed mark data file) will be issued, which can be used to submit a DPML Application. Each DPML Application must (i) include one or more SMD files corresponding to the applied-for label(s) and (ii) meet the qualifications specified by ICANN and detailed in the TMCH Guidelines (may change from time to time). Once the DPML subscription is complete, the trademark term is blocked from registration in all Donuts' TLDs for an initial period of five years. It is important to remember that a block is not a registered domain. Therefore, it cannot be used for a website or for email, and it does not resolve.
Are there any exclusions?
Previously Registered Domains: A term will not be blocked in any TLD where that term is already registered as a domain. If a domain is initially excluded from DPML because it is already registered, a rights holder may still subscribe to DPML (and block the term in all other Donuts TLDs). If the previously registered domain expires or is deleted, DPML protection will then automatically apply to that TLD.
Premium Domains: In Donuts TLDs, most domains are priced as standard. However there are a limited number of higher-priced premium names. DPML blocks terms for standard priced names only.
Other Sunrise Rights: Another trademark holder with Sunrise rights for a term may register that term as a domain name, even when a DPML subscription exists for it. This is known as a “DPML Override”.
What is a DPML Override?
A DPML block on a specific domain may be overridden and the domain registered by a mark owner with Sunrise rights to the applicable domain (a “DPML Override“). A DPML Override can be performed at any time and can be initiated by a mark holder of the DPML blocked term. The party performing an DPML Override must have an exact match, Sunrise-eligible trademark for the domain (i.e., the overriding party must have a valid SMD File issued by the TMCH).
Is there Whois output for DPML? Yes, the Whois output identifies the DPML block holder for the blocked domain and states that the domain is blocked from registration.
Do DPML account holders need be current in the TMCH? Yes. The trademark should remain current in the TMCH throughout the life of the DPML block. Donuts may elect to remove a DPML block for certain domains if the corresponding mark is not kept current in the TMCH.
Are there character limitations? One and two character DPML terms are not permitted. Three character DPML terms are permitted but only as an exact match of the trademark.
DPML Services in Control Panel
You can access a general overview (history) of your DPML block creations by going to Manage Products / Domain Block / List Domain Blocks. Please note: all successful DPML block creation requests lead to a regular domain with the extension '.dpml.zone'. The domain will be visible in the domain list about 10 minutes after the successful DPML block creation. The contact details, creation date, expiration date can be reviewed in the domain list. The DPML block can basically be updated and renewed like a domain.
When a trademark holder has a valid SMD file for a label block via a DPML, are DPML override is used to register the exact string associated with the valid SMD file. For example, registering "bugatti.international" when there is a DPML block on "bugatti". The rules for DPML Block Overrise are as follows:
See DPML Block Override API commands in the API Documentation.
NOTE ABOUT DPML ZONES:
The DPML zone for DONUTS: .dpml.zone The DPML zone for RIGHTSIDE: .dpml.pub
DPML - Check Domain(s) (DPML zones):
[COMMAND] command = CheckDomain domain = my-brand.dpml.pub EOF [RESPONSE] CODE=210 DESCRIPTION=Domain name available PROPERTY[REASON]= EOF
DPML - Add Domain Application (DPML Block):
* AddDomainApplication command * A valid SMD file must be provided * Class for DONUTS DPML BLOCKS - BLOCK_DPMLZONE * Class for RIGHTSIDE DPML BLOCKS - BLOCK_DPMLPUB * Generic class 'BLOCK' may also be used
[COMMAND] COMMAND = AddDomainApplication CLASS = BLOCK DOMAIN = example.dpml.pub OWNERCONTACT0 = <CONTACT> ADMINCONTACT0 = <CONTACT> TECHCONTACT0 = <CONTACT> BILLINGCONTACT0 = <CONTACT> PERIOD = 1Y SMD= ... With multiple SMD Files: SMD0 = ......... SMD1 = ......... SMD2 = ......... SMD3 = ......... SMD4 = ......... SMD5 = ......... ...
DPML Block Override - Get a Claim-Key:
[COMMAND] command = CheckDomain domain = bugatti.international phase = claims EOF [RESPONSE] CODE=211 DESCRIPTION=Claim exists PROPERTY[CLAIMKEY]=2014041600/a/c/1/rBEn1kz2kRMUYVRMYB EOF
DPML Block Override - Get a Claim-Notice:
[COMMAND] command = StatusTMDBClaim claimkey = 2014041600/a/c/1/rBEn1kz2kRMUYVRMYB EOF [RESPONSE] CODE=200 DESCRIPTION=Command completed successfully PROPERTY[NOTICE-ACCEPT-ID]=9a34ecd50000000000015907711 PROPERTY[NOTICE-CREATEDDATE]=2014-04-16 00:00:00 PROPERTY[NOTICE-EXPIRATIONDATE]=2014-04-18 00:00:00 PROPERTY[NOTICE-TEXT]=%0aTRADEMARK%20NOTICE%0a%0aYou%20have%20received%20this... PROPERTY[NOTICE-XML]=%3c%3fxml%20version%3d%221%2e0%22%20encoding%3d%22UTF%2d8... EOF
DPML Block Override - Register the domain as DPML OVERRIDE:
[COMMAND] COMMAND = AddDomainApplication CLASS = SUNRISE DOMAIN = bugatti.international PERIOD = 1Y OWNERCONTACT0 = <CONTACT> ADMINCONTACT0 = <CONTACT> TECHCONTACT0 = <CONTACT> BILLINGCONTACT0 = <CONTACT> NAMESERVER0 = <NAMESERVER> NAMESERVER1 = <NAMESERVER> NOTICE-ACCEPT-ID = NOTICE-EXPIRATIONDATE = NOTICE-ACCEPTEDDATE = (optional) SMD0 = vZGluZz0iVVRGLTgiPz4KPHNtZDpzaWduZWRNYXJrIHhtLTgiPz4KPHNtZDpzaWduZWRNYXJrae7 SMD1 = YW1zOnhtbDpucZDpzaWYW1zOnhtbDpucZDpzaWduZWRNYXJrIHhtLTgiPz4KPHNtZDpza4YW1zOn SMD2 = YtYmMxNy04YjdiMjRlNmRkMGQiPjxzbWZDpzaWduZWRNYXJrIHhtLTgiPz4KPHNtZDpzaTEzODY5 SMD3 = ...