.JOBS is considered as a sponsored Top-Level domain, specifically created to advertise corporate job opportunities. A .JOBS can be used and registered by any corporation / organization.

• Registry
• Periods
• API
• TLD specific

Registry	Verisign
Dispute Policy	Rules
Registrar	1api GmbH
WHOIS-Server	whois.internic.net
WHOIS-Update	Real-Time
Min. Characters	1
Max. Characters	63
Character Set	Letters and numbers Hyphens ("-"), however not at the beginning or directly in front of the TLD IDN: not allowed
Limitations	Registrant Contacts: Required: 1 / Maximum: 1 Admin Contacts: Required: 1 / Maximum: 1 Tech Contacts: Required: 1 / Maximum: 1 Billing Contacts: Required: 1 / Maximum: 1
{{{Possible Extensions}}}
IDN capable	No
Restore capable	Manual
Handle Updates	Supported
Registration System	Real-Time
Allowed number of NS	0 to 13
Registry Nameservercheck	No
Host IP-Addresses Type	IPv4
Hosts managed as	Object
Root Nameserver Update	Real-Time
SEC DNS Interface	DS data interface
Transferclass	Pull
Transfer Periods	1Y
Transfer Authcode required	Yes
Transfer Real-Time	No
Transfer Pending Period	5 days
Transfer Expire Action	ACK
Transfer ACK by	Registrar
Transfer NACK by	Registrar
Transfer Lock	Yes
Owner Change by	ICANN-TRADE

{{{Possible Extensions}}}
Registration Periods	1-10 years
Add Grace Period	0 days
Accounting Period	-5 days
Finalization Period	1 day
Failure Period	44 days
Payment Period	-61 days
Deletion Restorable Period	30 days
Deletion Hold Period	5 days
Explicit Renewals	Yes
Renewal Periods	1-9 years

Domain Registration

Domains can be registered in Real-Time with the API AddDomain command.

command = AddDomain
domain  = (DOMAIN)

REQUIRED

ownercontact0 = (CONTACT)
admincontact0 = (CONTACT)
techcontact0 = (CONTACT)
billingcontact0 = (CONTACT)
nameserver0 = (NAMESERVER)
nameserver1 = (NAMESERVER)

OPTIONAL

secdns-ds# = <LONGTEXT> | <NULL>
secdns-key# = <LONGTEXT> | <NULL>
secdns-maxsiglife = <INT>

auth = <TEXT> | <NULL>
host# = <TEXT> | <NULL>
transferlock = 0 | 1 | <NULL>
subuser = <TEXT> | <NULL>

nameserverset = <TEXT> | <NULL>

Domain Transfer

The transfer has to be initiated by the gaining registrar and can be requested with the API TransferDomain command.
A valid Authorization Code must be provided to initiate a transfer successfully. You may obtain the authorization code from the losing registrar.
As soon as a domain transfer has been initiated it can either be approved ("ACK") by Registrar or denied ("NACK") by Registrar. If the registry receives neither a denial ("NACK") nor an approval ("ACK") the transfer will be ACKed after 5 days.

Please note that HEXONET is acting in compliance with ICANN Transfers Guidelines. The respective policies can be viewed under http://www.icann.org/transfers/ :

As soon as you have submitted a transfer request, the HEXONET system will send an email to the domain registrant/administrative contact, asking for approval. As soon as this email has been confirmed, the transfer is initiated through the official registry and the losing registrar will receive the transfer request. The losing registrar will then send an email to the domain registrant/administrative contact, allowing him/her to cancel or deny the pending transfer. If there is no response received within 5 days, the transfer will automatically be processed.

If the email address in the WHOIS is invalid, then the transfer cannot be processed. If this is the case, then kindly contact your current registrar and ask them to update the WHOIS information accordingly. If you do not know the name of the registrar simply perform a WHOIS search at http://www.hexonet.net/

command = TransferDomain
domain = (DOMAIN)

REQUIRED

auth = <TEXT> | <NULL>
action = REQUEST | APPROVE | DENY | CANCEL | USERTRANSFER
domainauth = <TEXT>

OPTIONAL

order = CREATE | REPLACE | UPDATE
orderid = <INT>

emaillanguage = <TEXT>
emailurl = <TEXT>
emaillanguage = <TEXT>
emailtac = <TEXT>
requestentity = <TEXT>
emailsender = <TEXT> | <NULL>
emailsubject = <TEXT> | <NULL>

preconfirmed = <TEXT>
transferconfirmationemailoverride = <EMAIL> | <NULL>
nameserver# = <TEXT> | <NULL>
host# = <TEXT> | <NULL>
subuser = <TEXT> | <NULL>
period = <PERIOD>
x-idn-language = <TEXT> | <NULL>
ownercontact0 = <CONTACT> | <NULL>
admincontact0 = <CONTACT> | <NULL>
techcontact0 = <CONTACT> | <NULL>
billingcontact0 = <CONTACT> | <NULL>

transferlock = 0 | 1 | <NULL>

repository = <NULL> | <TEXT>

Delete Domain

Domains can be deleted with the API DeleteDomain command.
There is a Deletion Restorable Period of 30 days and a following Deletion Hold Period of 5 days.

command = DeleteDomain
domain = (DOMAIN)

REQUIRED

n/a

OPTIONAL

domainalerttriggercode = <TEXT> | <NULL>
repository = <TEXT> | <NULL>

Restore Domain

Restores can be processed manually within 30 days upon deletion. Please use the command RestoreDomain.

command = RestoreDomain
domain = (DOMAIN)

REQUIRED

n/a

OPTIONAL

force = 0 | 1 | <NULL>
renewalmode = <NULL> | <TEXT>
subuser = <TEXT>

Ownerchange

All contact information with the exception of registrant Name, Firstname and Organisation can be updated through the ModifyDomain command.
In order to change the owner you have to request a trade with the TradeDomain command. This can be done through our web interface or through our API:

command = TradeDomain
domain = <DOMAIN>
ownercontact0 = <CONTACT>

{{{Possible Extensions}}}